Metal paints
HomepageProductsMetal paints
Alkyd anticorrosive primer for steel and wood.
Alkyd primer usable even on small rugged substrates due to fast drying. Suitable for coatings of steel constructions, containers, pallets, transport boxes and wood. It can be applied by airless- or airmix-spraying, by a roller or a brush. Appropriate top coats KD 53, KE 54 or S 2013 apply after 30 minutes, for higher hardness, softer surface and faster drying after 12 hours.
Segment: | solvent-born |
---|
Substrate: | wood, steel with old coating, new steel - mechanically cleaned, new steel - manually cleaned |
---|
Paint type: | 1C alkyd |
---|
Usage: | primer |
---|
Technical data sheet
Safety data sheet
KG 11 is an anti-corrosive fast-drying alkyd primer on metal and wood.
Universal primer for steel constructions, containers, pallets, transport boxes, crates and wood. It can be applied by a roller, brush or spraying. For the highest performance use airless spraying. Appropriate finishing coats KD 53, KD 54, S 2013 apply after 30 minutes, for higher hardness and faster drying after 16 hours.
Segment: | solvent-born |
---|
Substrate: | wood, steel with old coating, new steel - mechanically cleaned, new steel - manually cleaned |
---|
Paint type: | 1C alkyd |
---|
Usage: | primer |
---|
Technical data sheet
Safety data sheet
KG 13 is an anti-corrosive fast-drying urethane alkyd primer on steel.
High-quality fast-drying primer for small and large areas. Suitable for steel constructions, residential containers, halls, conveyors, production lines, machinery, facilities and wood. The main advantage of this product is the possibility of overcoating with 2K PUR finishing enamels just after one layer of KG 13 (e.g. apply KG 13 as a interlayer during renovation of old unknown coatings). It can be applied by a roller, brush or spraying. Appropriate finishing coats KD 53, KD 54, S 2013, PE 33, PE 73 or PE 84 apply after 30 minutes. For higher hardness, softer surface, faster drying or by use brush/roller apply top coat after 16 hours. KG 13 is weldable at 20-30 µm DFT.
Segment: | solvent-born |
---|
Substrate: | wood, steel with old coating, new steel - mechanically cleaned, new steel - manually cleaned |
---|
Paint type: | 1C alkyd |
---|
Usage: | primer |
---|
Technical data sheet
Safety data sheet
EG 11 is an epoxy ester anti-corrosive fast-drying primer on steel.
Fast drying one-component primer for medium and heavier corrosive atmospheric environment. It has an excellent adhesion, corrosion and chemical resistance. It is resistant to aliphatic solvents and lower alcohols, detergents and high humidity. Can be applied by airless- or airmix- spraying, brush or roller. Appropriate top coats KD 53, KD 54, PE 33, PE 73 or PE 84 apply after 30 minutes, for higher hardness and faster drying after 16 hours. Not recommended the use of epoxy top-coats!
Segment: | solvent-born |
---|
Substrate: | masonry and plaster, concrete, galvanized steel, steel with old coating, new steel - mechanically cleaned, new steel - manually cleaned |
---|
Paint type: | 1C epoxy ester |
---|
Usage: | primer |
---|
Technical data sheet
Safety data sheet
ZG 11 is a two-component anti-corrosive epoxy primer on steel, zinc, aluminium and mineral surfaces.
Fast-drying two-component primer for severe corrosive environment. Suitable for coatings of steel structures, halls, residential containers, conveyors, production lines, machines and equipment, mineral substrates. Very high adhesion, corrosive, mechanical and chemical resistance. Resistant against petroleum substances, oils and grease, increased humidity, permanent submersion, dilute acid and alkali solutions. Can be applied by a roller, brush, airless- or airmix-spraying on steel, galvanized, aluminium and mineral surfaces. Appropriate top coats PE 33, PE 73, PE 84, ZD 53, KD 53 or KD 54 apply after 45 minutes, for higher hardness and faster drying after 16 hours.
Segment: | solvent-born |
---|
Substrate: | masonry and plaster, concrete, galvanized steel, steel with old coating, new steel - mechanically cleaned, new steel - manually cleaned |
---|
Paint type: | 2C epoxide |
---|
Usage: | primer |
---|
Technical data sheet
Safety data sheet
Anticorrosive epoxy paint
A reliable partner for demanding conditions
Are you looking for a coating that can handle even the most demanding conditions? ZG 13 is a two-component epoxy primer that protects steel, zinc, aluminum, and mineral substrates from corrosion, chemicals, and mechanical wear.
Why ZG 13?
• High resistance: Resistant to permanent immersion, petroleum substances, oils, fats, alcohol, cleaning agents, and diluted acids and alkalis.
• Fast drying: Dust dry in 10 minutes, touch dry in 55 minutes, handling possible in 1 hour 15 minutes (with ZH 91 hardener).
• Versatile use: Application by airless spraying, conventional spraying, brush or roller.
• Excellent adhesion: Adheres to steel, zinc, aluminum, and mineral substrates.
Certified quality
ZG 13 meets strict standards and has certificates confirming its resistance to oils, frost, water vapor, and mechanical wear.
ZG 13 is the ideal choice for reliability in demanding conditions. Try it and see for yourself!
Segment: | solvent-born |
---|
Substrate: | masonry and plaster, concrete, galvanized steel, steel with old coating, new steel - mechanically cleaned, new steel - manually cleaned, stainless steel, aluminium |
---|
Paint type: | 2C epoxide |
---|
Usage: | primer |
---|
Technical data sheet
Safety data sheet
ZG 16 is a two-component anti-corrosive epoxy primer containing zinc powder.
Fast-drying two-component primer containing zinc powder for severe corrosive atmospheric environment. Suitable for painting steel structures of bridges, stables, dairies, laundries, cans, tanks, vans, underground tanks and pipes. Excellent anti-corrosive protection, very high adhesion, mechanical and chemical resistance. Used only as the the first layer on abrasive blast-cleaned steel to Sa 2½ corresponding to ČSN EN ISO 8501-1. Zinc powder create a cathodic protection of the surface. Applicable by airless spraying, roller or brush. Appropriate top coats ZG 19, ZD 53, PE 33, PE 73 or PE 84 apply after 20 minutes, for higher hardness and faster drying after 16 hours.
Segment: | solvent-born |
---|
Substrate: | new steel - mechanically cleaned |
---|
Paint type: | 2C epoxide |
---|
Usage: | primer |
---|
Technical data sheet
Safety data sheet
Anticorrosive epoxy high-solid paint 2in1
Protection that really lasts
Are you looking for a primer that can handle even the most demanding conditions? ZG 17 is a two-component epoxy paint designed to protect steel structures, machinery, tanks, pipes, and mineral substrates.
What does ZG 17 offer you?
- Versatility: Great for bridges, waterworks, dairies, conveyors, machinery, tanks, and pipelines.
- Excellent adhesion: Adheres to steel and mineral materials.
- Long-term protection: Resistant to corrosion, chemicals, and mechanical damage. Easy to maintain.
- Resistance: Resistant to oils, greases, alcohols, cleaning agents, and diluted acids and alkalis.
- Easy application: Airless, brush, or roller.
- Fast work: Top coat can be applied in as little as 60 minutes (for greater hardness, we recommend waiting 16 hours).
Who is it ideal for?
For industrial, agricultural, and food processing facilities where high durability is required.
Certificates:
ZG 17 has all the necessary certificates from the Road and Motorway Directorate of Czech Republic and the Railway Administration of Czech Republic.
Recommendation:
If you want reliable protection that lasts, ZG 17 is the right choice!
Segment: | solvent-born |
---|
Substrate: | concrete, galvanized steel, new steel - mechanically cleaned, new steel - manually cleaned, stainless steel, aluminium, měď |
---|
Paint type: | 2C epoxide |
---|
Usage: | primer |
---|
Technical data sheet
Safety data sheet
ZG 19 is a priming or middle layer two-component anti-corrosive epoxy paint containing mica ferric oxide.
Two-component priming or intermediate coating containing mica ferric oxide. It provides excellent barrier protection of the surface. Suitable for coatings of waterworks, steel structures of bridges, stables, dairies, laundries, cans, tanks, vans, underground reservoirs, reservoirs, pipes and mineral substrates. It has excellent adhesion, insulating ability, chemical and mechanical resistance. It is used as a first layer on zinc-coated surfaces or as a second layer (intermediate layer) on a steel surface treated with paint ZG 16, ZG 11, ZG 13, ZG 17. Iron mica forms a barrier that prevents the penetration of water and oxygen to the substrate. Apply by airless spraying, roller or brush. Appropriate top coats ZD 53, PE 33, PE 73 or PD 84 apply after 30 minutes, for higher hardness and faster drying after 16 hours
Segment: | solvent-born |
---|
Substrate: | galvanized steel, steel with old coating, new steel - mechanically cleaned |
---|
Paint type: | 2C epoxide |
---|
Usage: | primer |
---|
Technical data sheet
Safety data sheet
Certificates
Certificates:
VITOGUARD ONS 23 - ZG 19 | 404.74 kB | CZ | download |
---|
PG 13 is a two-component anti-corrosive polyurethane primer on steel, zinc, wood and mineral surfaces.
Priming coat in severe corrosive atmospheric environment. Very high corrosion and mechanical resistance. It can be applied by a roller, brush or spraying on steel, freshly zinc-plated surfaces, wood and mineral surfaces. Appropriate finishing coats PE 33, PE 73, PE 84, KD 53, KD 54 apply after 40 minutes, for higher hardness and faster drying after 16 hours.
Segment: | solvent-born |
---|
Substrate: | wood, masonry and plaster, concrete, galvanized steel, steel with old coating, new steel - mechanically cleaned, new steel - manually cleaned |
---|
Paint type: | 2C polyurethan |
---|
Usage: | primer |
---|
Technical data sheet
Safety data sheet
HAG 08 is an anti-corrosive water-borne acrylic primer
HAG 08 used as primer for steel structures, pipes, castings, pallets, boxes, containers, production lines, machines and equipment. It has an excellent adhesion on wood and mineral surfaces. Applicable by spraying, brush or roller. Suitable for painting products in indirect contact with foodstuffs, animal feed and drinking water.
Segment: | water-born |
---|
Substrate: | wood, masonry and plaster, concrete, galvanized steel, steel with old coating, new steel - mechanically cleaned, new steel - manually cleaned, aluminium |
---|
Paint type: | 1C acrylate |
---|
Usage: | self-primer, primer |
---|
Technical data sheet
Safety data sheet
3in1 alkyd primer and topcoat
Alkyd primer, interlayer and top-coat (3 in 1) suitable for interior or exterior coatings of steel constructions, pallets, transport boxes and wood without a priming coat. The second layer can be applied 30 minutes after the first layer or after 12 hours with a brush / roller application.
Segment: | solvent-born |
---|
Substrate: | wood, steel with old coating, new steel - mechanically cleaned, new steel - manually cleaned |
---|
Paint type: | 1C alkyd |
---|
Usage: | self-primer |
---|
Technical data sheet
Safety data sheet