Products

KE 20

KG 09

Alkyd anticorrosive primer for steel and wood.

Alkyd primer usable even on small rugged substrates due to fast drying. Suitable for coatings of steel constructions, containers, pallets, transport boxes and wood.  It can be applied by airless- or airmix-spraying, by a roller or a brush. Appropriate top coats KD 53, KE 54 or S 2013 apply after 30 minutes, for higher hardness, softer surface and faster drying after 12 hours. 

KG 11

KG 11 is an anti-corrosive fast-drying alkyd primer on metal and wood.

Universal primer for steel constructions, containers, pallets, transport boxes, crates and wood. It can be applied by a roller, brush or spraying. For the highest performance use airless spraying. Appropriate finishing coats KD 53, KD 54, S 2013 apply after 30 minutes, for higher hardness and faster drying after 16 hours.

KG 13

KG 13 is an anti-corrosive fast-drying urethane alkyd primer on steel.

High-quality fast-drying primer for small and large areas. Suitable for steel constructions, residential containers, halls, conveyors, production lines, machinery, facilities and wood. The main advantage of this product is the possibility of overcoating with 2K PUR finishing enamels just after one layer of KG 13 (e.g. apply KG 13 as a interlayer during renovation of old unknown coatings). It can be applied by a roller, brush or spraying. Appropriate finishing coats KD 53, KD 54, S 2013, PE 33, PE 73 or PE 84 apply after 30 minutes. For higher hardness, softer surface, faster drying or by use brush/roller apply top coat after 16 hours. KG 13 is weldable at 20-30 µm DFT. 

EG 11

EG 11 is an epoxy ester anti-corrosive fast-drying primer on steel.

Fast drying one-component primer for medium and heavier corrosive atmospheric environment. It has an excellent adhesion, corrosion and chemical resistance. It is resistant to aliphatic solvents and lower alcohols, detergents and high humidity. Can be applied by airless- or airmix- spraying, brush or roller. Appropriate top coats KD 53, KD 54, PE 33, PE 73 or PE 84 apply after 30 minutes, for higher hardness and faster drying after 16 hours. Not recommended the use of epoxy top-coats! 

ZG 11

ZG 11 is a two-component anti-corrosive epoxy primer on steel, zinc, aluminium and mineral surfaces.

Fast-drying two-component primer for severe corrosive environment. Suitable for coatings of steel structures, halls, residential containers, conveyors, production lines, machines and equipment, mineral substrates. Very high adhesion, corrosive, mechanical and chemical resistance. Resistant against petroleum substances, oils and grease, increased humidity, permanent submersion, dilute acid and alkali solutions. Can be applied by a roller, brush, airless- or airmix-spraying on steel, galvanized, aluminium and mineral surfaces. Appropriate top coats PE 33, PE 73, PE 84, ZD 53, KD 53 or KD 54 apply after 45 minutes, for higher hardness and faster drying after 16 hours. 

ZG 13

ZG 13 is a two-component anti-corrosive epoxy primer on steel, zinc, aluminium and mineral surfaces.

Fast-drying two-component primer for severe corrosive environment. Suitable for painting steel structures of bridges, waterworks, stables, dairies, laundries, cans, residential containers, conveyors, production lines, machinery and equipment, tanks, vans, underground tanks, pipes and mineral substrates. Very high adhesion, corrosive, mechanical and chemical resistance. Resistant against petroleum substances, oils and grease, increased humidity, permanent submersion, dilute acid and alkali solutions. Can be applied by a roller, brush, airless- or airmix- spraying. Appropriate top coats PE 33, PE 73, PE 84, ZE 53, KD 53 or KD 54 apply after 30 minutes, for higher hardness and faster drying after 16 hours.

ZG 16

ZG 16 is a two-component anti-corrosive epoxy primer containing zinc powder.

Fast-drying two-component primer containing zinc powder for severe corrosive atmospheric environment. Suitable for painting steel structures of bridges, stables, dairies, laundries, cans, tanks, vans, underground tanks and pipes. Excellent anti-corrosive protection, very high adhesion, mechanical and chemical resistance. Used only as the the first layer on abrasive blast-cleaned steel to Sa 2½ corresponding to ČSN EN ISO 8501-1. Zinc powder create a cathodic protection of the surface. Applicable by airless spraying, roller or brush. Appropriate top coats ZG 19, ZD 53, PE 33, PE 73 or PE 84 apply after 20 minutes, for higher hardness and faster drying after 16 hours.

ZG 17

Priming epoxy high-solid paint (2 in 1)

Priming coat in severe corrosive atmospheric environment. Suitable for coating of steel structures of bridges, waterworks, stables,
dairies, laundries, cans, residential containers, conveyors, production lines, machinery and equipment, tanks, vans, underground
tanks, pipes and mineral substrates Very high adhesion, corrosive, mechanical and chemical resistance. Resistant against petroleum
substances, oils and grease, increased humidity, permanent submersion, dilute acid and alkali solutions. Can be applied by a roller,
brush or airless-spraying. Appropriate top coats PE 33, PE 73, PE 84 or ZE 53 apply after 30 minutes, for higher hardness and faster
drying after 16 hours.

ZG 18

2K epoxy zinc-rich primer

Are you looking for assurance that your structures can withstand even the harshest conditions? With ZG 18 Epoxy Base Paint, you get superior corrosion protection that will exceed your expectations.

•         80% zinc dust for maximum cathodic protection of the substrate
•         Quick-drying two-component system - saving time during application
•         Proven choice for bridges, water works, industrial sites and demanding food processing plants
•         Exceptional adhesion, chemical and mechanical resistance
•         Certified for use in coating systems for Road and Motorway Directorate of Czech Republic (IC VV) and Railway Administration of Czech Republic (ONS 23)

Why ZG 18?

ZG 18 is designed to protect steel surfaces where conventional coatings fail. Thanks to its high zinc content, it provides active corrosion protection and extends the life of structures even in extreme conditions. It is easy to apply by airless spray, brush and roller and allows rapid progression through subsequent coats.

Choose ZG 18 and give your steel the assurance of long-term protection - without compromise.

ZG 19

ZG 19 is a priming or middle layer two-component anti-corrosive epoxy paint containing mica ferric oxide.

Two-component priming or intermediate coating containing mica ferric oxide. It provides excellent barrier protection of the surface. Suitable for coatings of waterworks, steel structures of bridges, stables, dairies, laundries, cans, tanks, vans, underground reservoirs, reservoirs, pipes and mineral substrates. It has excellent adhesion, insulating ability, chemical and mechanical resistance. It is used as a first layer on zinc-coated surfaces or as a second layer (intermediate layer) on a steel surface treated with paint ZG 16, ZG 11, ZG 13, ZG 17. Iron mica forms a barrier that prevents the penetration of water and oxygen to the substrate. Apply by airless spraying, roller or brush. Appropriate top coats ZD 53, PE 33, PE 73 or PD 84 apply after 30 minutes, for higher hardness and faster drying after 16 hours

PG 13

PG 13 is a two-component anti-corrosive polyurethane primer on steel, zinc, wood and mineral surfaces.

Priming coat in severe corrosive atmospheric environment. Very high corrosion and mechanical resistance. It can be applied by a roller, brush or spraying on steel, freshly zinc-plated surfaces, wood and mineral surfaces. Appropriate finishing coats PE 33, PE 73, PE 84, KD 53, KD 54 apply after 40 minutes, for higher hardness and faster drying after 16 hours.