Epoxy

ZG 11

ZG 11 is a two-component anti-corrosive epoxy primer on steel, zinc, aluminium and mineral surfaces.

Fast-drying two-component primer for severe corrosive environment. Suitable for coatings of steel structures, halls, residential containers, conveyors, production lines, machines and equipment, mineral substrates. Very high adhesion, corrosive, mechanical and chemical resistance. Resistant against petroleum substances, oils and grease, increased humidity, permanent submersion, dilute acid and alkali solutions. Can be applied by a roller, brush, airless- or airmix-spraying on steel, galvanized, aluminium and mineral surfaces. Appropriate top coats PE 33, PE 73, PE 84, ZD 53, KD 53 or KD 54 apply after 45 minutes, for higher hardness and faster drying after 16 hours. 

ZG 13

ZG 13 is a two-component anti-corrosive epoxy primer on steel, zinc, aluminium and mineral surfaces.

Fast-drying two-component primer for severe corrosive environment. Suitable for painting steel structures of bridges, waterworks, stables, dairies, laundries, cans, residential containers, conveyors, production lines, machinery and equipment, tanks, vans, underground tanks, pipes and mineral substrates. Very high adhesion, corrosive, mechanical and chemical resistance. Resistant against petroleum substances, oils and grease, increased humidity, permanent submersion, dilute acid and alkali solutions. Can be applied by a roller, brush, airless- or airmix- spraying. Appropriate top coats PE 33, PE 73, PE 84, ZE 53, KD 53 or KD 54 apply after 30 minutes, for higher hardness and faster drying after 16 hours.

ZG 16

ZG 16 is a two-component anti-corrosive epoxy primer containing zinc powder.

Fast-drying two-component primer containing zinc powder for severe corrosive atmospheric environment. Suitable for painting steel structures of bridges, stables, dairies, laundries, cans, tanks, vans, underground tanks and pipes. Excellent anti-corrosive protection, very high adhesion, mechanical and chemical resistance. Used only as the the first layer on abrasive blast-cleaned steel to Sa 2½ corresponding to ČSN EN ISO 8501-1. Zinc powder create a cathodic protection of the surface. Applicable by airless spraying, roller or brush. Appropriate top coats ZG 19, ZD 53, PE 33, PE 73 or PE 84 apply after 20 minutes, for higher hardness and faster drying after 16 hours.

ZG 17

Priming epoxy high-solid paint (2 in 1)

Priming coat in severe corrosive atmospheric environment. Suitable for coating of steel structures of bridges, waterworks, stables,
dairies, laundries, cans, residential containers, conveyors, production lines, machinery and equipment, tanks, vans, underground
tanks, pipes and mineral substrates Very high adhesion, corrosive, mechanical and chemical resistance. Resistant against petroleum
substances, oils and grease, increased humidity, permanent submersion, dilute acid and alkali solutions. Can be applied by a roller,
brush or airless-spraying. Appropriate top coats PE 33, PE 73, PE 84 or ZE 53 apply after 30 minutes, for higher hardness and faster
drying after 16 hours.

ZG 18

2K epoxy zinc-rich primer

Are you looking for assurance that your structures can withstand even the harshest conditions? With ZG 18 Epoxy Base Paint, you get superior corrosion protection that will exceed your expectations.

•         80% zinc dust for maximum cathodic protection of the substrate
•         Quick-drying two-component system - saving time during application
•         Proven choice for bridges, water works, industrial sites and demanding food processing plants
•         Exceptional adhesion, chemical and mechanical resistance
•         Certified for use in coating systems for Road and Motorway Directorate of Czech Republic (IC VV) and Railway Administration of Czech Republic (ONS 23)

Why ZG 18?

ZG 18 is designed to protect steel surfaces where conventional coatings fail. Thanks to its high zinc content, it provides active corrosion protection and extends the life of structures even in extreme conditions. It is easy to apply by airless spray, brush and roller and allows rapid progression through subsequent coats.

Choose ZG 18 and give your steel the assurance of long-term protection - without compromise.

ZG 19

ZG 19 is a priming or middle layer two-component anti-corrosive epoxy paint containing mica ferric oxide.

Two-component priming or intermediate coating containing mica ferric oxide. It provides excellent barrier protection of the surface. Suitable for coatings of waterworks, steel structures of bridges, stables, dairies, laundries, cans, tanks, vans, underground reservoirs, reservoirs, pipes and mineral substrates. It has excellent adhesion, insulating ability, chemical and mechanical resistance. It is used as a first layer on zinc-coated surfaces or as a second layer (intermediate layer) on a steel surface treated with paint ZG 16, ZG 11, ZG 13, ZG 17. Iron mica forms a barrier that prevents the penetration of water and oxygen to the substrate. Apply by airless spraying, roller or brush. Appropriate top coats ZD 53, PE 33, PE 73 or PD 84 apply after 30 minutes, for higher hardness and faster drying after 16 hours

PG 13

PG 13 is a two-component anti-corrosive polyurethane primer on steel, zinc, wood and mineral surfaces.

Priming coat in severe corrosive atmospheric environment. Very high corrosion and mechanical resistance. It can be applied by a roller, brush or spraying on steel, freshly zinc-plated surfaces, wood and mineral surfaces. Appropriate finishing coats PE 33, PE 73, PE 84, KD 53, KD 54 apply after 40 minutes, for higher hardness and faster drying after 16 hours.

WP 10

Wash-primer

Are you looking for a reliable base for coating metal surfaces? Our two-component reactive epoxy primer is just what you need! It adheres perfectly to aluminium, stainless steel, zinc and new steel - whether hand cleaned or shot blasted. It also works great on non-oxidized galvanized sheet metal.

Why should you choose it?

•         Excellent adhesion to various metal substrates
•         Extremely high corrosion resistance - ideal for heavy duty applications
•         Fast drying - you can get back to work in 10-15 minutes
•         Easy application: airless/air spray, brush and roller
•         No sanding required - saves time and labour
•         Repaintable with all common 2K PU and EP coatings and levelers

How to do it?

One thin layer (10-20 μm) is all it takes to create a reliable base for subsequent coatings. You don't have to sand the surface, so the job is done in no time. The paint is suitable for paint applicators and paint shops that want to offer customers a professional solution for the protection of metal structures, machinery and sheet metal.

Tip: Ideal choice for bridges, structures, frames, car bodies, but also for various smaller projects where speed, reliability and long term protection are needed.

Try a foundation you can truly rely on!