Polyurethane

PE 33

PE 33 is a fast-curing self-priming two-component anti-corrosive polyurethane paint.

Self-priming coating on steel, galvanized constructions, wooden and mineral surfaces, residential and material containers, production lines and conveyors without priming coat. Very high mechanical and chemical resistance. It is resistant against petroleum substances, oils and grease, increased humidity, dilute acid and alkali solutions. For the highest performance use airless spraying. For small areas use a brush or roller.

PE 73

Universal high-solid 2-in-1 paint for all surfaces

Are you looking for a paint that will protect steel, galvanized and mineral surfaces? PE 73 is a self-priming, high-solids polyurethane paint of the 2-in-1 type – primer and topcoat in one. It can be easily and quickly applied with an airless sprayer, spray gun, brush, or roller, and the resulting surface is resistant to weathering, mechanical stress, and chemical stress for a long time.

Advantages of PE 73:

·        Color fastness: The paint retains its color and gloss even when exposed to sunlight and weathering.

·        Resistance: It can withstand moisture, oils, fats, alcohol, and common cleaning agents.

·        Quick application: You can apply the second coat in just one hour (spraying) or after 16 hours when using a brush/roller.

·        Adhesion: It adheres to steel, mineral substrates, and fresh galvanized surfaces.

·        Certificates: Meets standards for use in ŘSD and Správa železnic systems, as well as for surfaces in direct contact with food.

·        Packaging: From small to large packages, so you can choose according to the scope of work.

PE 73 = fast, high quality, no compromises.

PE 84

PE 84 is a fast-curing self-priming two-component anti-corrosive polyurethane paint.

Fast-drying high-solid glossy two-component primer and top-coat (2 in 1). Suitable for coatings of transport machinery and for application requiring the high mechanical, chemical and color fastness. It is resistant against increased humidity, petroleum substances, oils, grease, alcohol and common cleaning products. Applicable by airless- or airmix-spraying, a brush or a roller. The second layer apply 60 minutes after the first layer, for brush/roller is recommended to apply the second layer after 16 hours.