Technical liquids
HomepageProductsThinnersTechnical liquids
environmentally friendly cleaner, degreaser and stripper
Used for cleaning application equipment, cleaning wet or dry waterborne paints drips, degreasing surfaces before application of any type of paint and removal of old paint, dip for long enough. Applying by the a spray-gun, a brush or a towel. After short effect of CL 07, the surface must be wiped with a clean and dry towel. Depending in the degree of grease use a new towel. After use CL 07 rinse the surface with clean water! Do not use to adjust the viscosity of paints. CL 07 does not contain either acids or alkalies.
Technical data sheet
Safety data sheet
Accelerator
Additive is intended for regional retailers, wholesalers and final consumers. It is used to accelerate the drying time of VITON
polyurethane coatings PG 13, PE 33, PE 73 a PE 84. It shortens the curing of applied paint and can be advantageously used at low
temperatures between 0-5 ° C. The recommended dosage of the accelerator is 10-20 grams per kilogram of paint. First dose the
accelerator to the paint, mix thoroughly with the machine after dosing and after that dose the hardener! When using an accelerator, it
is necessary to calculate the half of the pot-life and to take care of the fast processing of the dyed paint and its perfect removal from
the application device.
Technical data sheet
Safety data sheet
Conductive agent for the vitocolormix® tinting system.
Developed especially for regional dealers and wholesale to modification of coating materials according to the supplied recipes. The
agent allow to adjust conductivity of coating material quickly and comfortably. Dose to the tinted coating material. Recommended
dosage is 6 - 12 grams for 1 kilogram of coating material. After dosage mix well and measure the conductivity. Do not use for epoxy
and waterborne coatings!
Technical data sheet
Safety data sheet
English 
Česky
Deutsch