Products
HomepageProducts
thinner for epoxy coating materials.
ZT 03 is intended to adjust the viscosity of VITON paints applied by a spray gun, a brush or a roller. The quantity of thinner depends on the chosen type of application, on the temperature and on the type of chosen paint. The maximal quantity is specified in the technical data sheet of the particular paint. Mentioned thinner is intended only for coating materials and paints by VITON s.r.o. When applying a VITON paint combined with a thinner by another manufacturer the paint guarantee expires.
Technical data sheet
Safety data sheet
Hardener for faster drying time of 2K epoxy coating materials
Hardener ZH 91 is intended for hardening two-component epoxy coatings VITON when it is necessary to accelerate the drying and curing time. Use of the hardener in combination with coatings from other manufacturers is at your own risk. We recommend the use of scales for mass curing and branded measuring cups for volume curing. Accuracy of dosage has a significant effect on the final chemical, physical and mechanical properties of the coating.
Technical data sheet
Safety data sheet
hardener for two-component epoxy paints
For mixing with appropriate coating materials according to the given volume and weight mixing ratio. These ratios are specified in the technical data sheet of each particular coating material. The dosing accuracy influences chemical, physical and mechanical properties of the coating system. We recommend to use a scale (mixing by weight) or a calibrated measuring cup (mixing by volume). Always first harden the coating material, then dilute it up to the required application viscosity.
Technical data sheet
Safety data sheet
Hardener for 2K epoxy coating materials
The hardener is designed for curing two-component epoxy coatings in a given weight or volume ratio. This hardener is intended exclusively for VITON s.r.o. coatings. Use of the hardener in combination with coatings of other manufacturers is at your own risk.
Technical data sheet
Safety data sheet
Hardener for 2K HS epoxy coating materials
The hardener is designed for curing high-solid two-component epoxy coatings in a given weight or volume ratio. This hardener is intended exclusively for VITON s.r.o. coatings. Use of the hardener in combination with coatings of other manufacturers is at your own risk.
Technical data sheet
Safety data sheet
Hardener for two-component high-solid polyurethane paint
For mixing with appropriate coating materials according to the given volume and weight mixing ratio. These ratios are specified in
the technical data sheet of each particular coating material. The dosing accuracy influences chemical, physical and mechanical
properties of the coating system. We recommend to use a scale (mixing by weight) or a calibrated measuring cup (mixing by
volume). Always first harden the coating material, then dilute it up to the required application viscosity.
Technical data sheet
Safety data sheet
hardener for two-component polyurethane paints
For mixing with appropriate coating materials according to the given volume and weight mixing ratio. These ratios are specified in the technical data sheet of each particular coating material. The dosing accuracy influences chemical, physical and mechanical properties of the coating system. We recommend to use a scale (mixing by weight) or a calibrated measuring cup (mixing by volume). Always first harden the coating material, then dilute it up to the required application viscosity.
Technical data sheet
Safety data sheet
Hardener for faster drying time of 2K polyurethane coating materials
Hardener PH 95 is intended for hardening two-component polyurethane coatings VITON when it is necessary to accelerate the drying and curing time. Use of the hardener in combination with coatings from other manufacturers is at your own risk. We recommend the use of scales for mass curing and branded measuring cups for volume curing. Accuracy of dosage has a significant effect on the final chemical, physical and mechanical properties of the coating.
Technical data sheet
Safety data sheet
hardener for two-component polyurethane paints
For mixing with appropriate coating materials according to the given volume and weight mixing ratio. These ratios are specified in the technical data sheet of each particular coating material. The dosing accuracy influences chemical, physical and mechanical properties of the coating system. We recommend to use a scale (mixing by weight) or a calibrated measuring cup (mixing by volume). Always first harden the coating material, then dilute it up to the required application viscosity.
Technical data sheet
Safety data sheet
Accelerator
Additive is intended for regional retailers, wholesalers and final consumers. It is used to accelerate the drying time of VITON polyurethane coatings PG 13, PE 33, PE 73 a PE 84. It shortens the curing of applied paint and can be advantageously used at low temperatures between 0-5 ° C. The recommended dosage of the accelerator is 10-20 grams per kilogram of paint. First dose the accelerator to the paint, mix thoroughly with the machine after dosing and afterwards dose the hardener! When using an accelerator, it is necessary to calculate the half of the pot-life and to take care of the fast processing of the dyed paint and its perfect removal from the application device.
| Segment: | special |
|---|
| Usage: | special |
|---|
Technical data sheet
Safety data sheet
Conductive agent for the vitocolormix® tinting system
Developed especially for regional dealers and wholesale to modify coating materials according to the supplied recipes. The agent allows to adjust conductivity of coating material quickly and comfortably. Dose to the tinted coating material. Recommended dosage is 6 - 12 grams for 1 kilogram of coating material. After dosage mix well and measure the conductivity. Do not use for epoxy and waterborne coatings!
| Segment: | special |
|---|
| Usage: | special |
|---|
Technical data sheet
Safety data sheet
Matting agent for the vitocolormix® tinting system
The matting additive is intended exclusively for use in the vitocolormix® tinting system to reduce the gloss of solventborne coatings AE 31, KE 30, KE 31, KE 53, PE 33.
| Segment: | special |
|---|
| Usage: | special |
|---|
Technical data sheet
Safety data sheet
English 
Česky